We use cookies to enhance your browsing experience, serve personalized ads or content, and analyze our traffic. By clicking "Accept All", you consent to our use of cookies.

NEW POWER TEN P63C-10660D P63C SERIES VARIABLE POWER SUPPLY 10V 660A 10kW

$3,750

Description

NEW POWER TEN P63C-10660D P63C SERIES VARIABLE POWER SUPPLY 10V 660A 10kW - Output: 10V, 660A, 50mV Ouput P-P Ripple - Input Voltage: 190-253 VAC, 47-63 Hz - Input Current @ 208 VAC (Typical): At 10.0 kW Output: 41 A (Operates from Delta or Wye Source) - Dimensions: 19" (W) X 5.25" (H) X 22" (D) - AC Input Interface: 3 wire + GND (#10-32 threaded studs) (208 VAC) - DC Output Interface - Control/Monitor Interface: DB 25-pin female connector - Regulation (Line or Load) Voltage: 0.1% of maximum rated output - Current: 0.5% of maximum rated output - Transient Response - A 30% current step load will recover to within ±2% of set voltage within 10 msec. - Stability - ±0.05% of set point per 8 hours after 30 minutes warm-up at fixed line, load and temperature. - Temperature Coefficient - 0.02%/°C of rated output voltage - 0.03%/°C of rated output current - Operating Temperature - 0 to +50° C, No derating - Storage Temperature - -20 to +70°C - Cooling - Internal fans - Controls (Front Panel) - On/Off switch, DC volts adjust, DC amps adjust, OVP preset adjust (limit set) - Meters/Indicators - LCD DC voltmeter, ammeter and OVP limit set. LED indicators for voltage mode, current mode. OVP fault and fault - Built-In Protection - Over Voltage, Current limit Fold back, Over Temperature, Brown Out, Turn On Surge Limit, Slow Start - Remote Control/Monitor (Rear Panel) - On/Off control via contact closure, 6-120 VDC, TTL or CMOS switch, output voltage and current monitor, OVP limit set, summary fault status on P60 Series. - Remote Programming (Voltage (0 to 100%) Current (0 to 100%)): - Resistive: 0-5K ohms 0-5K ohms - Voltage: 0-5 VDC or 10 VDC 0-5 VDC or 10 VDC - Optional IEEE 488.2 and RS 232 Programming with SCPI protocol - Remote Sensing: - Terminals provided to sense output voltage at load - Operational Features: - Master/Slave, Series, Parallel CONDITION: NEW IN CRATE WARRANTY: 120 DAYS _____________________________________________________________________________________ UPALLET/A6

Specifications

ManufacturerPower Ten
ModelP63C-10660D
ConditionUsed
Stock Number314762225005
SeriesP63C
Nominal Current Rating660A
Output Voltage Rating (DC)10 V
Nominal Power Rating10 kW
Country of OriginUnited States
Social